Datto Managed Power enables MSPs to remotely or automatically reboot any non-responsive electronic device. The MP60 includes 4,000 joules of surge protection, six outlets, two USB-A and USB-C ports and integrated WiFi.
But if you’re an MSP, that’s not easy! You either have to waste time going onsite (a Power Trip) or ask your client to reboot it for you. Not anymore. Not with Datto Managed Power.
If a device stops responding, you can tell your client to walk into the closet, pull out the plug and then plug it back in. And then hope that they pulled the right plug. Not a good option!
The other choice? Go on a POWER TRIP! That's when you take a trip to your client's site just to pull the plug yourself. Also, not a good option!
Datto Managed Power eliminates POWER TRIPS. Now, from the comfort of your own chair, you can click a button and reboot that non-responsive device.
And if the internet is down? Datto Managed Power can be set to continuously ping a list of IP addresses or websites. If those pings don't connect, each individual power port can be set to automatically reboot. Simple, Power at your Fingertips.
What happens if a device becomes non-responsive, and the MSP is not able to get to it immediately? The client has to wait, or worse, they start to pull plugs on things. That can create a whole host of issues for both the client and the MSP.
That’s why we built the Ping Test Power Cycle, a list of customizable IP addresses or sites for the Managed Power device to ping on a regular basis. Every five minutes, the Managed Power device pings up to 5 different IP addresses. If all pings fail, for each power port that has Ping Text Power Cycle turned on, the reboot process for that power port automatically initiates. That’s zero touch power cycling, saving the MSP time and effort, and eliminating troublesome, non responsive devices automatically.
Not every device plugged in to Managed Power has an IP address. And some devices just need to be more carefully managed. So, we provide a manual one-click reboot option for each power port.
Simply click the Power Cycle button for the power port in question and it reboots. OK, we ask you to confirm your choice since we don’t want you to do something by accident.
But it’s one (ish) clicks and your non-responsive device is back in action.
It all starts with the Datto Partner Portal, one of the best reasons for being a Datto Partner. Within the Partner Portal, Datto partners get access to everything they need, including tech support, device management, training, product information, sales tools and marketing materials.
And it’s all secured with two factor authentication. It is truly a one-stop-shop of management and business tools built for an MSP to operate more efficiently and to grow its business.
For the MSP, being able to remotely manage devices is table stakes. Cloud management simplifies things, and enables remote deployments and troubleshooting.
And for an MSP, managing and/or monitoring its client’s IT infrastructure from the cloud lowers the total cost of ownership. That’s why Datto Managed Power is fully cloud-managed, with nothing to set up or deploy on-site.
Plug your Datto Managed Power device in and it will self-organize with all of the other Datto Networking devices on the network and automatically connect to Datto’s cloud management Portal.
Configure in the cloud. Just-plug-it-in. It's really that simple.
|Power Specs & Capacity|
|Surge Protection||4,000 Joules|
|Input||100-125V, 15.5A, 60Hz|
|USB||2 USB C (2.1A), 2 USB A (1A), Power Only|
|WiFi||2x2 802.11n Mesh|
|Per-Port Power Reading||Yes|
|Hardware & Environmental|
|Altitiude||Up to 2000m (6,561 ft.)|
|Operating Temperature||5°C to 40°C (41° to 104°F)|
|Dimensions||120mm x 101.6mm x 38.1mm (4.75 in. x 4 in. x 1.5 in.)|
|Weight||.81Kg (1.79 lbs)|
|Power Cord Length||6ft.|
|Cable Type||IEC Detachable|
|Certifications||ETL US safety UL60950, CSA 22.2 Canadian UL60950, USB UL60950, UL60730, UL1449, UL61010, FCC/IC, Rohs, UL 498|
|Regional Availability||North America|
We'd love to help